Inner Mongolia Bull Technology Co., Ltd.

For the components of the new fully automatic Liangpi machine, strain aging is generally considered to be an unfavorable phenomenon. The improvement of strength during strain aging is based on pre-cold deformation. However, it is often difficult to produce uniform cold deformation in steel and is difficult to utilize. Bending, curling, punching, cutting and other process operations that produce local plastic deformation are often used. The strain and aging of the fully automatic Liangpi machine will reduce the fracture resistance of these local areas and become the origin of fracture. Even if the fully automatic Liangpi machine does not produce plastic deformation during the process, when the components are loaded, a certain amount of plastic deformation will inevitably occur near the tips of the cracks on the fully automatic Liangpi machine. The real fully automatic Liangpi machine has a strain aging effect. The roar in this local area increases and the plasticity decreases, which increases the risk of brittle fracture of the component.
The sensitivity of the strain aging of the steel of the new fully automatic cold skin machine is mainly related to the small amount of atoms dissolved in the solid solution, especially the large impact. Therefore, controlling the nitrogen content in steel through smelting and pouring methods will reduce the aging sensitivity of steel. For example, adding a small amount of strong nitride-forming elements to steel can inhibit or even completely eliminate the strain aging phenomenon. Strain aging, quenching aging and blue embrittlement of low carbon components.
The low-carbon components of the new fully automatic Liangpi machine are heated to the following temperature for quick cooling, also known as quenching or plastic deformation. During the placement process, the strength and hardness usually increase, while the plasticity and toughness decrease. This phenomenon in the fully automatic Liangpi machine called statute of limitations. The aging after plastic deformation is called strain aging. The aging after quenching is called quenching aging. The aging under natural conditions is called natural aging. The aging performed at a certain temperature is called artificial aging.
Strictly speaking, not only low carbon steel, but also all kinds of steel have aging phenomena. However, when the carbon content is high, its impact is relatively small and the industry usually does not pay attention to it. The fully automatic Liangpi machine has a significant impact on the aging of low-carbon components, and cold deformation operations are often used in the process. Therefore, Niu Niu Liangpi Machine Headquarters reminds you that you must pay attention. Liangpi processing is an industry closely related to the people, and its market prospect is broad and will never be exhausted. Liangpi is the main food of people in northern my country. Liangpi processed from flour is smooth and tough, and it is delicious. The methods and seasonings can also be diversified, and the tastes are also different in style. It is deeply loved by the majority of northerners. However, in many places, Liangpi is still produced manually, which is labor-intensive and not energy-saving. The quality of the Liangpi produced is not as good as that produced by the Liangpi machine. With the continuous improvement of living standards, people's requirements for Liangpi are getting higher and higher. Therefore, investing in Liangpi processing and producing Liangpi with real taste is a risk-free project with huge room for development.